kalınlıkta

listen to the pronunciation of kalınlıkta
Türkisch - Englisch
thickness
A layer

We upholstered the seat with three thicknesses of cloth to make it more comfortable to sit on.

The property of being thick (in dimension)
The property of being thick (slow to understand)
{n} grossness, density, closeness, weight
depth of the material and contributory to pressure requirements; thickening reduces the pressure required to fill the part
(Caliper) The measurement of the paper in thousandths of an inch or (mils & microns)
resistance to flow the dimension through an object as opposed to its length or width used of a line or mark
A measure of how thick (in dimension) something is
resistance to flow
Specifies a thickness of material to be removed by machining Compare with offset
The thickness of a layer in the atmosphere is proportional to the mean temperature of that whole layer The layer most often used in meteorology is between 1000 and 500 millibars There can be different temperature profiles in the lowest layer of the atmosphere with the same 1000-500 millibar thickness value, depending on what is happening above that lowest layer For example, if the lower levels are warming but higher levels are cooling, the overall mean temperature, the thickness, could remain the same Likewise, on a sunny day, the amount of incoming solar radiation, affects the temperature right at the earth's surface, without necessarily having much effect on the thickness of the whole layer
The dimension of a masonry unit at right angles to the face of the wall, floor, or other assembly in which the units are used
Distance from one surface of either a tape' backing or adhesive to the other' usually expressed in mils or thousandths of an inch This is usually measured under slight pressure with a special gauge
Gauge or depth of material
the vertical depth of a slab of air bounded by chosen isobaric surfaces
= Dimension of the chamber perpendicular to the multilayer planes; it is given by the multilayer thickness, the spacer height, and additional space for protections, supports, frames
The distance that a profile is offset to form a walled solid with the Construct Parametric Projection tool, Construct Parametric Revolution tool, Create Cut tool, or Construct Protrusion tool
The difference in height between two atmospheric pressure levels The thickness is directly related to the average temperature in the column of air between the pressure levels (thus, higher thicknesses typically mean warmer temperatures) The most common thickness used is for the 1000-500mb layer Forecasters also look at other thickness layers such as 1000-850 mb layer (sometimes called low level thickness) Thicknesses are measure in decameters (1 decameter=10 meters)
kalınlık
thickness
kalınlık
gauge
kalınlık
(Bilgisayar) weight
kalınlık
girth
kalınlık
stoutness
kalınlık
density
kalınlık
crassness
kalınlık
denseness
kalınlık
thickness; coarseness
kalınlık
thick
kalınlık
thickness; coarseness; deepth
kalınlık
diameter
kalınlık
deepness (of a voice)
Türkisch - Türkisch

Definition von kalınlıkta im Türkisch Türkisch wörterbuch

Kalınlık
(Osmanlı Dönemi) SİHAN
Kalınlık
(Osmanlı Dönemi) SEHANET
kalınlık
Uzunluk ve genişlik dışında üçüncü boyut
kalınlık
Cisimlerde uzunluk ve genişlik dışında üçüncü boyut
kalınlık
Kalın olma durumu
kalınlıkta
Favoriten