thicknesses

listen to the pronunciation of thicknesses
İngilizce - İngilizce
plural of thickness
thickness
A layer

We upholstered the seat with three thicknesses of cloth to make it more comfortable to sit on.

thickness
The property of being thick (in dimension)
thickness
The property of being thick (slow to understand)
thickness
{i} distance between sides, amount of material; layer
thickness
{n} grossness, density, closeness, weight
thickness
depth of the material and contributory to pressure requirements; thickening reduces the pressure required to fill the part
thickness
(Caliper) The measurement of the paper in thousandths of an inch or (mils & microns)
thickness
resistance to flow the dimension through an object as opposed to its length or width used of a line or mark
thickness
A measure of how thick (in dimension) something is
thickness
resistance to flow
thickness
Specifies a thickness of material to be removed by machining Compare with offset
thickness
The thickness of a layer in the atmosphere is proportional to the mean temperature of that whole layer The layer most often used in meteorology is between 1000 and 500 millibars There can be different temperature profiles in the lowest layer of the atmosphere with the same 1000-500 millibar thickness value, depending on what is happening above that lowest layer For example, if the lower levels are warming but higher levels are cooling, the overall mean temperature, the thickness, could remain the same Likewise, on a sunny day, the amount of incoming solar radiation, affects the temperature right at the earth's surface, without necessarily having much effect on the thickness of the whole layer
thickness
The dimension of a masonry unit at right angles to the face of the wall, floor, or other assembly in which the units are used
thickness
Distance from one surface of either a tape' backing or adhesive to the other' usually expressed in mils or thousandths of an inch This is usually measured under slight pressure with a special gauge
thickness
Gauge or depth of material
thickness
the vertical depth of a slab of air bounded by chosen isobaric surfaces
thickness
= Dimension of the chamber perpendicular to the multilayer planes; it is given by the multilayer thickness, the spacer height, and additional space for protections, supports, frames
thickness
The distance that a profile is offset to form a walled solid with the Construct Parametric Projection tool, Construct Parametric Revolution tool, Create Cut tool, or Construct Protrusion tool
thickness
The difference in height between two atmospheric pressure levels The thickness is directly related to the average temperature in the column of air between the pressure levels (thus, higher thicknesses typically mean warmer temperatures) The most common thickness used is for the 1000-500mb layer Forecasters also look at other thickness layers such as 1000-850 mb layer (sometimes called low level thickness) Thicknesses are measure in decameters (1 decameter=10 meters)
thickness
the dimension through an object as opposed to its length or width
thickness
used of a line or mark
thickness
A measurement take at the thickest point
thickness
The quality or state of being thick (in any of the senses of the adjective)
thickness
The quality of being thick (in consistency)
thickness
The thickness of a part
thickness
The height difference between two atmospheric pressure levels and is related to the average temperature in the column