shearing strength

listen to the pronunciation of shearing strength
İngilizce - Türkçe
(Çevre) kesilme gücü
shear strength
(Mekanik) kesme dayanımı
shear strength
kayma mukavemeti
shear strength
(Mekanik) kayma dayanımı
shear strength
makaslama direnci
shear strength
(Nükleer Bilimler) kesme mukavemeti
shear strength
makaslama dayanımı
İngilizce - İngilizce

shearing strength teriminin İngilizce İngilizce sözlükte anlamı

shear strength
The resistance to forces that cause or tend to cause two contiguous parts of a body to slide relative to each other in a direction parallel to their contrast
shear strength
The resistance of a material to deformation Consisting of two components: 1) friction between the grains of the material, and, 2) cohesive substances between the grains that hold them together
shear strength
In materials, the stress required to produce fracture in the plane of cross section, the conditions of loading being such that the directions of force and of resistance are parallel and opposite although their paths are offset a specified minimum amount
shear strength
The capacity of a material to resist separation in allele planes, as in cutting
shear strength
An engineering term used to describe a soil or structure to resist applied forces that causes or tends to cause two contiguous parts of a body to slide relative to each other
shear strength
The maximum resistance of a soil to shearing stresses
shear strength
the maximum shear stress that a given material can sustain
shear strength
The maximum load required to shear the specimen in such a manner that the moving portion has completely cleared the stationary portion
shear strength
– The ability of a material to withstand shear stress The stress at which a material fails in shear
shear strength
(in roofing) the stress required to disrupt a seam or bonded joint or attachment by forcing the substrate material to slide out from the overlying material or vice versa
shear strength
A measure of the ability of a soil to resist forces that tend to separate it from its position on a slope and cause it to move
shear strength
Resistance to transverse loading Transverse loads should only be applied to a dowel pin or to the unthreaded section of a screw; otherwise, deformation will occur Shear strength is measured in terms of pounds or kilonewtons
shear strength
Maximum shear stress that can be sustained by a material before rupture It is the ultimate strength of a material subjected to shear loading It can be determined in a torsion test where it is equal to torsional strength The shear strength of a plastic is the maximum load required to shear a specimen in such a manner that the resulting pieces are completely clear of each other It is reported in psi based on the area of the sheared edge (ASTM D-732) The shear strength of a structural adhesive is the maximum shear stress in the adhesive prior to failure under torsional loading (ASTM E-229) Methods for determining shear strength of timber are given in ASTM D-143 and ASTM D-198
shear strength
The limiting stress of a material determined by measuring a strain resulting from applied forces that cause or tend to cause bonded contiguous parts of a body to slide relative to each other in a direction parallel to their plane of contact; the value of the force achieved when shearing stress is applied to the bond (normally parallel to the substrate) to determine the breaking load Strength to withstand shearing of a material
shear strength
ability of a material to withstand shear stress or stress at which a material fails in shear
shear strength
1) The ability of a material to withstand shear stress 2) The stress at which a material fails in shear
shear strength
The stress required to produce fracture in the plane of cross section, the conditions of loading being such that the directions of force and of resistance are parallel and opposite although their paths are offset a specified minimum amount The maximum load divided by the original cross-sectional area of a section separated by shear
shear strength
The ability of a material to withstand a stress that makes two contacting parts slide upon each other in opposite directions SOLIDS Non-evaporating material TACK Stickiness of an adhesive
shear strength
The resistance to shearing
shearing strength

    Heceleme

    shear·ing strength

    Türkçe nasıl söylenir

    şîrîng strengkth

    Telaffuz

    /ˈsʜərəɴɢ ˈstreɴɢkᴛʜ/ /ˈʃɪrɪŋ ˈstrɛŋkθ/