arc welding

listen to the pronunciation of arc welding
Английский Язык - Английский Язык
The process of welding two pieces of metal together using the heat generated by an electric arc between two electrodes
Welding that uses an electric arc to provide heat. a method of joining two pieces of metal together by heating them with a special tool
A group of welding processes in which fusion is obtained by heating with an electric arc or arcs, with or without the use of filler metal
A welding process where similar materials are joined with a heating process caused by an electric arc In the most common use, this process includes the use of a filler metal
Gas tungsten arc welding
(Mühendislik) Gas tungsten arc welding (GTAW), also known as tungsten inert gas (TIG) welding, is an arc welding process that uses a nonconsumable tungsten electrode to produce the weld. The weld area is protected from atmospheric contamination by a shielding gas (usually an inert gas such as argon), and a filler metal is normally used, though some welds, known as autogenous welds, do not require it. A constant-current welding power supply produces energy which is conducted across the arc through a column of highly ionized gas and metal vapors known as a plasma
Shielded metal arc welding
(Mühendislik) Shielded metal arc welding (SMAW), also known as manual metal arc (MMA) welding or informally as stick welding, is a manual arc welding process that uses a consumable electrode coated in flux to lay the weld. An electric current, in the form of either alternating current or direct current from a welding power supply, is used to form an electric arc between the electrode and the metals to be joined. As the weld is laid, the flux coating of the electrode disintegrates, giving off vapors that serve as a shielding gas and providing a layer of slag, both of which protect the weld area from atmospheric contamination
Submerged Arc Welding
(Mühendislik) Submerged Arc Welding (SAW) is a common arc welding process. It requires a continuously fed consumable solid or tubular (flux cored) electrode. The molten weld and the arc zone are protected from atmospheric contamination by being “submerged” under a blanket of granular fusible flux. When molten, the flux becomes conductive, and provides a current path between the electrode and the work
gas metal arc welding
(Mühendislik) Gas metal arc welding (GMAW), sometimes referred to by its subtypes metal inert gas (MIG) welding or metal active gas (MAG) welding, is a semi-automatic or automatic arc welding process in which a continuous and consumable wire electrode and a shielding gas are fed through a welding gun. A constant voltage, direct current power source is most commonly used with GMAW, but constant current systems, as well as alternating current, can be used. There are four primary methods of metal transfer in GMAW, called globular, short-circuiting, spray, and pulsed-spray, each of which has distinct properties and corresponding advantages and limitations
arc welding

    Турецкое произношение

    ärk weldîng

    Произношение

    /ˈärk ˈweldəɴɢ/ /ˈɑːrk ˈwɛldɪŋ/
Избранное