chamfered

listen to the pronunciation of chamfered
الإنجليزية - الإنجليزية
past of chamfer
chamfer
to cut a groove in something; to flute
chamfer
to cut off the edge or corner of something; to bevel
chamfer
an edge or end bevel that does not go all the way
chamfer
To bevel the inside of a case mouth The bevel allows bullets to start into the case mouth without crushing the case
chamfer
an angled relief or cut at an edge added for a finished appearance and to break sharp edges
chamfer
The flat surface formed by cutting off a sharp corner, usually at an angle of 45 degrees
chamfer
A bevelled edge made on a corner of a workpiece at 45 degrees
chamfer
A beveled edge on a fastener The chamfer angle is measured from the normal to the axis of the fastener
chamfer
surface made by cutting across the square angle of a stone block, piece of wood, etc , at an angle of 45° to the other two surfaces
chamfer
{f} cut a sloping edge, bevel
chamfer
A beveled edge
chamfer
A simple bevel done for embellishment of a timber
chamfer
{i} slope, slanted edge
chamfer
The surface formed by cutting away the arris, or angle, formed by two faces of a piece of timber, stone, etc
chamfer
A bevel, a corner or edge removed, a relief
chamfer
A beveled or sloping edge (typically 45°) to reduce the sharp intersection of two faces
chamfer
Corner of a board beveled at a 45angle Two board butt-jointed with chamfered edges form a V-joint
chamfer
A sloping or bevelled edge
chamfer
A beveled surface to eliminate an otherwise sharp corner
chamfer
A beveled edge, technically one of 45 degrees
chamfer
Surface made by smoothing off the angle between two stone faces
chamfer
cut a bevel on; shape to a bevel; "bevel the surface"
chamfer
The conical feature at the end of the rivet nut shank The chamfer makes the fastener easier to place in the installation hole
chamfer
The surface made when the sharp edge of a stone block or a piece of wood is cut away, usually at an angle of 45-degrees to the other two surfaces
chamfer
To cut a furrow in, as in a column; to groove; to channel; to flute
chamfer
A beveled edge or corner, such as one cut at a 45 degree angle (see figure, right)
chamfer
A corner or edge that is cut at an angle or beveled
chamfer
an oblique surface cut on the edge or corner of a board, usually sloping at forty-five degrees
chamfer
To make a chamfer on
chamfer
cut a furrow into a columns
chamfer
To bevel a sharp external edge To cut a line across two linear elements, connecting the elements and modifying either one or both of the original elements A planar transition between two faces of a solid
chamfer
To bevel or slope an edge or corner
chamfer
The cutting of stone at an angle to give expansion to a window or door rather than leaving just a squared-off opening (i e , planed-off edges)
chamfer
two surfaces meeting at an angle different from 90 degrees
chamfered

    النطق

    علم أصول الكلمات

    [ 'cham(p)-f&r, 'cham-p& ] (transitive verb.) circa 1573. back-formation from chamfering, alteration of Middle French chanfreint, from past participle of chanfraindre to bevel, from chant edge + fraindre to break, from Latin frangere; more at CANT, BREAK.
المفضلات