brake shoe

الإنجليزية - التركية

تعريف brake shoe في الإنجليزية التركية القاموس.: (Otomotiv) fren balatası; (Otomotiv) fren pabuçları; eğleç çarığı; fren pabucu; fren takozu
brake shoe lining: fren pabucu balatası
brake shoe pin: fren pabucu pimi
inside shoe brake: içten pabuçlu fren
internal shoe brake: içten pabuçlu fren
leading brake shoe: (Otomotiv) birinci fren pabucu
rear brake shoe: (Otomotiv) arka fren pabucu
triple shoe brake block: üç parçalı zarflı sabo

الإنجليزية - الإنجليزية

تعريف brake shoe في الإنجليزية الإنجليزية القاموس.: An element of a drum brake into which the friction-producing brake lining is attached; The arc-shaped carrier to which the friction lining are mounted and which force the lining against the rotating drum during braking; holds the brake pad; A curved piece of aluminum with a lining used to prevent the Micrometer Stop from moving during operation; A curved metal block that presses against and arrests the rotation of a wheel or brake drum. one of the two curved parts that press against the wheel of a vehicle in order to make it go more slowly or stop; Correctly, the shoe is the metal component (rim and web assembly) used to push the friction material against the drum in a drum brake system, but the term is now used to refer to the whole shoe and lining assembly; device that rubs against a wheel to slow or stop a moving vehicle; The arc-shaped carrier to which the brake linings are mounted in a drum brake They also force the lining against the rotating drum during braking; a restraint provided when the brake linings are moved hydraulically against the brake drum to retard the wheel's rotation; moving member(s) of a brake, lined with friction material which, when in contact with the brake drum, holds the elevator at floor level On some types of control, it will stop the elevator when power is removed from the hoist motor
brake shoes: plural form of brake shoe
brakeshoe: Alternative spelling of brake shoe
brake shoes: The friction device used to stop the vehicle in a drum brake system The "shoes" are half mooned shaped and are hydraucially pushed against the smooth circular drum surface thus stopping the car The friction material used is usually semi-metallic, sometimes organic in nature
brake shoes: Brake shoes are used specifically with drum brake systems Brake shoes fit inside the brake drum, and are pressed against the drum by a wheel cylinder when the brakes are applied, thus slowing or stopping the car
brake shoes: Curved, replaceable friction surfaces used with drum-type brakes
brake shoes: Curved pieces of metal on which brake linings are bonded The shoes push the lining against the brake drum in order to slow and stop the car
brake shoes: The replaceable friction material that contacts the brake drum in a drum brake system to slow or stop the car
brake shoes: (Otomotiv) Curved pieces of metal on which brake linings are bonded. The shoes push the lining against the brake drum in order to slow and stop the car
brake shoes: The brake linings used in drum brakes (the rear brakes on most cars) Each drum contains two shoes (a primary or leading shoe, and a secondary or trailing shoe) Replacement shoes are sold in sets of four, one pair for each brake When shoes are replaced, the condition of the mounting hardware and return springs should be carefully inspected Replace any worn, damaged or stretched components Drums should also be turned on a lathe to restore a smooth surface