anneal

Английский Язык - Турецкий язык

Определение anneal в Английский Язык Турецкий язык словарь

{f} tavlamak [met.]

(Diş Hekimliği) Metali özelliğine göre ısıtıp soğutarak sertliğini alma

tutuşturmak

yumuşatmak

tavlamak

sertleştir

tav vermek

tavla

sertlestir

annealing oven tavlama fırım

kızdırdıktan sonra yavaş yavaş soğutarak yumuşatmak

{f} sertleştirmek

soğut

tavlamak metal

yakmak

Связанные Термины

annealing

tavlama

annealing

{f} sertleştir

Annealed

tavl

annealing

sertlik verme

annealing

PCR'da DNA'ların çoğaltılması aşamasında kullanılan termo cycle'da ki birinc,i aşama. Bu aşamada primerların ortamda bulunan hedef DNA kompenenti ile birleşme ve tekrar ayrıştırma olayı

annealing

(Mühendislik) normalleştirme tavı, menevişleme

blue anneal

mavi tavlamak

stabilizing anneal

stabilize tavı, dengelestirme tavı

annealing

(sıcaklık muamelesi ile) tavlamak

intermediate anneal

(Mekanik,Teknik) ara tavlama

Английский Язык - Английский Язык

Определение anneal в Английский Язык Английский Язык словарь

To strengthen or harden

There was more than one way to anneal them with regards to resolve.

To subject to great heat, and then cool slowly for the purpose of rendering less brittle; to temper; to toughen

{v} to temper glass, season, heat, bake

(Biyoloji) Biochemistry - recombine (DNA) in the double-stranded form

To heat metal, glass or other materials above the critical or re-crystallization temperature, then cool, to eliminate the effects of color working, relieve internal stresses or improve electrical, magnetic or other properties

A process, consisting of heating to and holding at a suitable temperature followed by cooling at a suitable rate, used primarily to soften metallic materials, such as steel This process also simultaneously produces desired changes in microstructure, as in other properties, such as improvement of mechanical or electrical properties, increase in stability in dimensions, facilitation of cold work, etc Also see Continuous Anneal and Batch Anneal

To soften & relieve strains in any solid material, such as metal or glass, by heating to just below its melting point & then slowly cooling it Annealing generally lowers the tensile strength of the material, while improving its flex life & flexibility

a process of heating and cooling alloys to make them stronger and less brittle Annealing works by removing impurities and making alloys homogeneous 1

-The process of controlled heating and cooling of a metal In wire and cable products, copper and aluminum are annealed to increase flexibility while maintaining adequate strength

To soften and relieve strains in any solid material, such as metal or glass, by heating to just below its melting point and then slowly cooling it This also generally lowers the tensile strength of the material, while improving its flex life

The biochemical process of hybridising or binding two segments of complementary nucleic acid at an optimal temperature of 40-65ºC [Roche PCR]

To subject to heat with subsequent cooling When annealing copper; the act of softening the metal by means of heat to render it less brittle

To work copper or other metals by heating and hammering to shape

To soften metal by heating and slowly cooling In annealing cast iron the carbon is burned out, near the surface, leaving the outer surface tough and strong while the interior is hard

to heat a material to a predetermined temperature and slowly cooling it to relieve stress and make it less brittle, also refer to temper

To soften and relieve strains in any solid material, such as metal or glass, by heating to just below its melting point and then slowly cooling it Annealing generally lowers the tensile strength of the material, while improving its flex life and flexibility

to prevent the formation of or remove stresses in plastics by cooling from a suitable temperature

A relatively cool processing step (among the last in wafer manufacturing) that helps minimize stress in the crystal structure of the wafer

To subject a material to a heat treatment to remove the effects of cold work, lowering its tensile strength, rendering it softer with greater elongation

To soften metals by heating to remove internal stresses caused by rolling and forging

A means of tempering a hand-made glass marble to reduce its brittle nature and give it added strength Once completed, the marble is placed in an annealing oven where its temperature is reduced slowly over a 24 hour period to room temperature The removal of differential thermal stress Machine-made glass marbles are not annealed

Relief of mechanical stress through heat and gradual cooling Annealing copper renders it less brittle

To heat an article to a predetermined temperature and slowly cool it to relieve stresses The annealing of metal components may reduce their hardness

To subject to high heat with subsequent cooling Annealing copper renders it less brittle

A term used by the Independent Gemological Laboratories to describe a heating enhancement process used with color gemstones

The process of softening metal For ferrous metals, that is those containing iron, the process involves heating the steel up to its critcal temperature and then slowly cooling it For non-ferrous metals such as brass, bronze, silver, gold, aluminum and the like, the process is exactly opposite The metal is heated to the critical temperature and then quickly quenched in water, snow, urine, or oil What annealing actually does on a molecular level is to allow the metal crystals to realign, moving them into their more relaxed state When the metal is worked, the crystals are moved out of alignment, contributing to both hardness and brittleness Practically, in the production of arms and armour the metal must be annealed as it is worked, otherwise the metal might stress enough that it will crack

The biochemical process of hybridising or binding two segments of complementary nucleic acid at an optimal temperature of 40-65ºC [Roche PCR]

toughen (steel or glass) by a process of gradually heating and cooling; "temper glass"

Heating and cooling metals to make them harder and stronger

- A process that prevents or removes strain by heating glass above a certain temperature and then cooling slowly in a very controlled manner Used in glass manufacturing

to make metal or glass hard by heating it and then slowly letting it get cold

To subject to great heat, and then cool slowly, as glass, cast iron, steel, or other metal, for the purpose of rendering it less brittle; to temper; to toughen

{f} toughen, temper (by heating and cooling)

To heat, as glass, tiles, or earthenware, in order to fix the colors laid on them

toughen (steel or glass) by a process of gradually heating and cooling; "temper glass

Связанные Термины

annealing

Present participle of anneal

annealing

The act of heating solid metal or glass to high temperatures and cooling it slowly so that its particles arrange into a defined lattice

Without annealing, the quality of our metal products will diminish.

Annealing

A process of controlled heating followed by gradual cooling to relieve mechanical stresses Annealing copper makes it more pliable

Annealing

The process of slowly cooling a completed object in an auxiliary part of the glass furnace, or in a separate furnace This is an integral part of glassmaking because if a hot glass object is allowed to cool too quickly, it will be highly strained by the time it reaches room temperature; indeed, it may break as it cools Highly strained glasses break easily if subjected to mechanical or thermal shock See Lehr

Annealing

A comprehensive term used to describe the heating and cooling cycle of steel in the solid state The term annealing usually implies relatively slow cooling In annealing, the temperature of the operation, the rate of heating and cooling, and the time the metal is held at heat depend upon the composition, shape, and size of the steel product being treated, and the purpose of the treatment The more important purposes for which steel is annealed are as follows: to remove stresses; to induce softness; to alter ductility, toughness, electric, magnetic, or other physical and mechanical properties; to change the crystalline structure; to remove gases; and to produce a definite microstructure

Annealing

The heating of a die or planchet to soften the metal before preparation of the die or striking of the coin

Annealing

A process involving high-temperature heating and cooling of the as-rolled cold rolled steel substrate to make it softer and more formable

Annealing

a generic term used to denote a heat treatment wherein the microstructrure and, consequently, the properties of a material are altered Frequently, refers to heat treatment whereby a cold-worked metal is softened by allowing it to recrystallize

Annealing

the tempering of glass or metals by heat Can also be used as a treatment for thin films to give them the desired properties

Annealing

Annealing is the process of heating a metal and then cooling it to make it more workable As metal is worked (hammered, rolled, etc ), stresses make the metal brittle (the metal molecules are pulled into random structures during the working) Annealing the metal make the metal re-crystallize, putting the molecules in an orderly structure The temperature (and amount of time it takes) for annealing a metal depends on what metal or alloy it is Large pieces are annealed in an annealing oven; small pieces are annealed using a blow-torch

Annealing

The process of heating a glass object to release the strain introduced in the forming process

Annealing

In the manufacturing of float glass, it is the process of controlled cooling done in a lehr to prevent residual stresses in the glass Re-annealing is the process of removing objectionable stresses in glass by re-heating to a suitable temperature followed by controlled cooling

Annealing

The process of heating up coin planchets, just prior to striking in order to make them soft and thus receive a better impression of the design This process today is now accomplished by advanced machinery In ancient times the mint would anneal the planchets by holding them in a pair tongs over a charcoal fire

Annealing

hardening something by heat treatment

Annealing

refers to the process of heating silver during manufacture in order to restore its malleability and to strengthen the metal, which becomes brittle with hammering

Annealing

To heat above the critical or re-crystallization temperature, then controlled cooling metal, glass or other materials to eliminate the effects of cold-working, relieve internal stresses or improve strength, ductility or other properties

Annealing

1 Heating and then cooling metals in a controlled atmosphere to soften them 2 A process involving heating and cooling usually applied to induce softening In box annealing, the material to be annealed is enclosed in a metal container with, or without packing material to minimize oxidation The charge is usually heated slowly to a temperature just below the transformation range, but sometimes just above, or within it, and cooled slowly

Annealing

Heating steel to, and holding at a suitable temperature, followed by relatively slow cooling The purpose of annealing may be to remove stresses, to soften the steel, to improve machinablility, to improve cold working properties, or to obtain a desired structure

Annealing

Heating to and holding at a suitable temperature and then cooling at a suitable rate, for such purposes as reducing hardness, improving machinability, facilitating cold working, producing a desired microstructure, or obtaining desired mechanical, physical, or other properties When applied to nonferrous alloys, the term annealing implies a heat treatment designed to soften an age-hardened alloy by causing a nearly complete precipitation of the second phase in relatively coarse form Any process of annealing will usually reduce stresses, but if the treatment is applied for the sole purpose of such relief, it should be designated stress relieving

Annealing

a heat treatment of a metal designed to produce a soft, ductile condition Typically the metal is heated and allowed to cool slowly

Annealing

a generic term used to denote a heat treatment where the microstructure and properties of a material are altered; it frequently refers to a heat treatment where a previously cold-worked metal is softened by allowing it to recrystallize

Annealing

A process whereby the paperweight is cooled very slowly to prevent it cracking This usually takes place in a large annealing oven with the paperweights passing through different temperature regions on a conveyor Arrow Cane A cane found of Baccarat paperweights made during the Classic Period Aventurine Usually a gold colour, but can be red or green or blue, according to what metallic particles are added to the mixture Also known as Goldstone Back to Top

Annealing

The process of relieving stresses in molded plastic articles by heating to a predetermined temperature, maintaining this temperature for a predetermined length of time, and slowly cooling the articles to be painted which might craze due to solvent attack

Annealing

A heat or thermal treatment process by which a previously cold-rolled steel coil is made more suitable for forming and bending by heating to a designated temperature for a sufficient amount of time and then cooled The bonds between the grains of the metal are stretched when a coil is cold rolled, leaving the steel brittle and breakable Annealing "recrystallizes" the grain structure of steel by allowing for new bonds to be formed at the high temperature There are two ways of annealing : Batch(Box) Three to four coils are stacked on top of each other, and a cover is placed on top and : Continuous: The coil is uncoiled and run through a series of vertical loops within a heater: The temperature and cooling rates are controlled to obtain the desired mechanical properties for the steel

Annealing

A heat or thermal treatment process by which a previously cold-rolled steel coil is made more suitable for forming and bending The steel sheet is heated to a designated temperature for a sufficient amount of time and then cooled The bonds between the grains of the metal are stretched when a coil is cold rolled, leaving the steel brittle and breakable Annealing "recrystallizes" the grain structure of steel by allowing for new bonds to be formed at the high temperature There are two ways to anneal cold-rolled steel coils - batch and continuous

Annealing

A thermal treatment to eliminate work hardening and solution heat-treatment hardening of a metal by raising it to an elevated temperature and slow cooling to obtain the lowest strength and highest ductility

Annealing

The process of heating a device or material in order to repair damage to the crystal lattice or activate dopant atoms

To anneal

neal

annealed

made less brittle by heating and then cooling; "used annealed paving blocks

annealed

A fiber feature where the fiber has been exposed to elevated temperatures under tension during the manufacturing spinning process Annealing aligns the polymeric chains and promotes fiber crystallinity and strength

annealed

past of anneal

annealed

the process of heating a metal to make it less brittle

annealed

Softest possible state of any material Annealing, Full -Heat treating process wherein metal is heated to a temperature above its critical range held at that temperature long enough to allow full recrystallization, then slowly cooled through the critical range Annealing removes working strains, reduces hardness, and increases ductility

annealed

made less brittle by heating and then cooling; "used annealed paving blocks"

annealer

One who, or that which, anneals

annealer

A device or process that anneals. (Also the operator of such a device or process.)

annealer

{i} strengthener; something that tempers and toughens (through heating and cooling)

annealing

The process used to render glass, iron, etc

annealing

In metallurgy, the process of heating solid metal to high temperatures and cooling it slowly so that its particles arrange into a defined lattice

annealing

less brittle, performed by allowing them to cool very gradually from a high heat

annealing

The burning of metallic colors into glass, earthenware, etc

annealing

{i} process of tempering (by heating and cooling)

annealing

Treatment of a metal, alloy, or other material by heating to a predetermined temperature, holding for a certain time, and then cooling to room temperature, done to improve ductility and reduce brittleness. Process annealing is carried out intermittently during the working of a piece of metal to restore ductility lost through repeated hammering or other working, if several cold-forming operations are required but the metal is so hardened after the first operation that further cold working would cause cracking (see hardening). Full annealing is done to give workability to such parts as forged blanks destined for use in the machine-tool industry. Annealing is also done for relief of internal stresses in metal and glass. Annealing temperatures and times differ for different materials and with properties desired; steel is usually held for several hours at about 1,260°F (680°C) and then cooled for several hours. See also heat treating, solid solution

anneals

third-person singular of anneal

Расстановка переносов

an·neal

Турецкое произношение

ınil

Синонимы

toughen, temper, harden, thicken

Антонимы

soften, weaken

Произношение

/əˈnēl/ /əˈniːl/

Этимология

[ &-'nE(&)l ] (verb.) 1664. Middle English anelen to set on fire, from Old English on[AE]lan, from on + [AE]lan to set on fire, burn, from Al fire; akin to Old English [AE]led fire, Old Norse eldr.

Времена

anneals, annealing, annealed