dokumacılık ile ilgili

listen to the pronunciation of dokumacılık ile ilgili
Türkçe - İngilizce
weaving
Gerund of weave
The process of making woven material on a loom
{n} the act of making into cloth
The process of making fabric by interlacing a series of warp yarns with weft yarns at right angles
The act of one who, or that which, weaves; the act or art of forming cloth in a loom by the union or intertexture of threads
The method or process of interlacing two or more sets of yarn or similar materials so that they cross each otherat (usually) right angles to produce woven fabric
The original method for manufacturing carpet In the weaving process, backing yarns are woven into a durable fabric while, simultaneously, face yarns are looped over wires and interlocked in the woven back See ""Axminster" and "Wilton "
Interlacing (threads, yarns, strips, fibrous materials, etc ) so as to form a fabric or material
present participle of weave
Production of fabric by interlacing two sets of yarns so that they cross each other, normally at right angles, usually accomplished with a hand-or power-operated loom. In weaving, lengthwise yarns are called warp and crosswise yarns are called weft, or filling. Most woven fabrics are made with their outer edges finished in a manner that avoids raveling (because the weft yarn turns around instead of ending in a cut end). These edges, called selvages, run lengthwise, parallel to the warp yarns. The three basic weaves are plain or tabby (weft threads go over one warp thread, then under one), twill, and satin. Fancy weaves, such as pile, Jacquard, dobby, and leno, require more complicated looms or special loom attachments. See also Navajo weaving
walking unsteadily; "a stqaggering gait"
Making cloth by interlacing yarns at right angles according to a predetermined pattern
An incessant motion of a horse's head, neck, and body, from side to side, fancied to resemble the motion of a hand weaver in throwing the shuttle
{i} act or process of making fabric by interlacing threads
A type of conflict where traffic veering right and traffic veering left must cross paths within a limited distance Typically this occurs when an exit ramp closely follows an entrance ramp, between two closely spaced interchanges or two loops of a cloverleaf Weaving introduces safety and capacity problems, and is a primary reason some older full cloverleafs are being converted to other types Loop ramps are either removed outright (diagonal ramps assume their traffic) or replaced by flyovers
A poorly wound roll of tape in which the individual layers of tape are not in alignment with the other layers
The interlacing of right angles of two systems of threads known as warp and filling The former runs lengthwise and may go over or under the latter, which runs crosswise
dokumacılık ile ilgili