capak alma

listen to the pronunciation of capak alma
Türkçe - İngilizce
deburring
Removal of the very subtle ridge on the edge of strip metal left by such cutting operations as slitting, trimming, shearing, or blanking (See EDGE-ROLLING)
Removing burrs, sharp edges, or fins from metal parts by filing, grinding, or rolling the work in a barrel with abrasives suspended in a suitable liquid medium Sometimes called burring
the process of removing rough edge deformations caused by cutting and/or drilling dielectric supports for printed circuits
A method whereby the raw slit edge of metal is removed by rolling or filing
The removal of burrs, sharp edges or fins by mechanical, chemical, electrochemical or electrical discharge means
{i} act of removing burrs, removal of burrs
Removing the subtle ridge from the edge of strip metal that results from cutting operation such as slitting, trimming, shearing, or blanking
In production engineering, a burr (= sharp-edged notch) is formed at edges and borders of work-pieces in most of the procedures: for cast components at the seam line of upper and lower part of the mould, for die components at the seam line of upper and lower die, at the cutting edges of shears and saw blanks, at welding seams, etc These have to be removed for reasons of functional fulfillment or safety, too There are numerous possibilities for that: e g grinding, brushing as well as chemical, electrochemical and electric removing procedures or also combinations of these procedures
The removal of burrs, sharp edges or fins by mechanical, chemical, or electrochemical means
Removing burrs, sharp edges, or fins from metal parts by filing, grinding, or tumbling
an edging operation that has removed the burr from a slit strip edge
capak alma