engrave

listen to the pronunciation of engrave
الإنجليزية - الإنجليزية
To put in a grave, to bury

So both agree their bodies to engraue; / The great earthes wombe they open to the sky .

To carve (something) into a material

He engraved his name.

To carve text or symbols into (something), usually for the purposes of identification or art

He engraved the plaque with his name.

to cut or carve in or upon some surface
{v} to cut out figures, to imprint
{f} carve out letters or designs on hard surfaces; impress deeply
To impress deeply; to infix, as if with a graver
If you engrave something with a design or words, or if you engrave a design or words on it, you cut the design or words into its surface. Your wedding ring can be engraved with a personal inscription at no extra cost Harrods will also engrave your child's name on the side I'm having `John Law' engraved on the cap. a bottle engraved with her name
To form or represent by means of incisions upon wood, stone, metal, or the like; as, to engrave an inscription
carve, cut, or etch into a material or surface; "engrave a pen"; "engraved the winner's name onto the trophy cup"
carve, cut, or etch into a block used for printing or print from such a block; "engrave a letter"
To decorate metal by gouging a design with graver's tools; embellishing metal or other material with patterns using a stamping tool or drill This was a popular technique in mid-Victorian jewelry The resulting depressions were often filled with colored enamel Also refers to inscribing a dedication or monogram to identify a piece Stamped pieces can be designed to imitate hand engraving Under magnification, the design is much more sharp in a hand engraved piece, with subtle irregularities
carve, cut, or etch a design or letters into; "engrave the pen with the owner's name"
To cut with a graving instrument in order to form an inscription or pictorial representation; to carve figures; to mark with incisions
To decorate metal by gouging a design with graver's tools This was a popular technique in mid-Victorian jewelry The resulting depressions were often filled with colored enamel Also refers to inscribing a dedication or monogram to identify a piece Stamped pieces can be designed to imitate hand engraving Under magnification, the design is much more sharp in a hand engraved piece, with subtle irregularities
To mark, print, or incise letters or designs onto a surface, usually paper, with a photo-etched and hand-finished die The die, or engraving, is usually metal, although it can be stone, wood, or other material Engravings are one level and shallow to carry ink in the recessed areas of the die before transferring the ink to the paper
impress or affect deeply; "The event engraved itself into her memory"
to cut figures or letters into wood or metal
carve in a wood, metal, or stone; cut in
impress or affect deeply; "The event engraved itself into her memory
carve, cut, or etch into a material or surface; "engrave a pen"; "engraved the winner's name onto the trophy cup" carve, cut, or etch a design or letters into; "engrave the pen with the owner's name" carve, cut, or etch into a block used for printing or print from such a block; "engrave a letter" impress or affect deeply; "The event engraved itself into her memory
To produce a raised printed surface by printing with a cut-away plate
Engraving is a method of surface decoration in which a design is etched into the surface with a sharp tool
To deposit in the grave; to bury
One kind of process used to create characters on stamping equipment, it involves using a single lip tapered tool to cut the character shape from the material
To cut in; to make by incision
engraven
engrave an inscription
carve (words, names, etc.) on a surface
engraved
Simple past tense and past participle of engrave
engraver
A person who engraves
engraver
A tool used in this process
engraving
the practice of incising a design onto a hard, flat surface, by cutting grooves into it
engraving
the art of drawing music notation at high quality, see Engraving
engraving
Present participle of engrave
engraver
{n} a man who engraves in copper
engraving
{n} a picture or mark engraved
-engrave
to cut figures or letters into wood or metal
-engrave
To decorate metal by gouging a design with graver's tools; embellishing metal or other material with patterns using a stamping tool or drill This was a popular technique in mid-Victorian jewelry The resulting depressions were often filled with colored enamel Also refers to inscribing a dedication or monogram to identify a piece Stamped pieces can be designed to imitate hand engraving Under magnification, the design is much more sharp in a hand engraved piece, with subtle irregularities
-engrave
carve, cut, or etch into a block used for printing or print from such a block; "engrave a letter"
-engrave
Engraving is a method of surface decoration in which a design is etched into the surface with a sharp tool
-engrave
To mark, print, or incise letters or designs onto a surface, usually paper, with a photo-etched and hand-finished die The die, or engraving, is usually metal, although it can be stone, wood, or other material Engravings are one level and shallow to carry ink in the recessed areas of the die before transferring the ink to the paper
-engrave
carve, cut, or etch a design or letters into; "engrave the pen with the owner's name"
-engrave
carve in a wood, metal, or stone; cut in
-engrave
impress or affect deeply; "The event engraved itself into her memory"
-engrave
To produce a raised printed surface by printing with a cut-away plate
-engrave
One kind of process used to create characters on stamping equipment, it involves using a single lip tapered tool to cut the character shape from the material
-engrave
carve, cut, or etch into a material or surface; "engrave a pen"; "engraved the winner's name onto the trophy cup"
-engrave
To decorate metal by gouging a design with graver's tools This was a popular technique in mid-Victorian jewelry The resulting depressions were often filled with colored enamel Also refers to inscribing a dedication or monogram to identify a piece Stamped pieces can be designed to imitate hand engraving Under magnification, the design is much more sharp in a hand engraved piece, with subtle irregularities
Engraved
insculptured
Engraving
engravement
To engrave
ingrave
engraved
decorated with engravings
engraved
Having the surface covered with irregular, impressed lines
engraved
made by engraving
engraved
emphasis If you say that something is engraved on your mind or memory or on your heart, you are emphasizing that you will never forget it, because it has made a very strong impression on you. Her image is engraved upon my heart
engraved
Stamps printed from plates engraved in recess
engraved
- use of abrasive material to cut lines, ornaments, or script into a hard surface
engraved
{s} carved, graven; firmly impressed
engraved
The process of cutting into the surface of an annealed glass object either by holding it against a rotating copper wheel fed with an abrasive or by scratching it, usually with a diamond See also carving, cutting, stippling
engraved
cut or impressed into a surface; "an incised design"; "engraved invitations"
engraved
cut or impressed into a surface; "an incised design"; "engraved invitations
engraved
Made by engraving or ornamented with engraving
engraver
a printmaker who prints from an engraved printing plate a skilled worker who can inscribe designs or writing onto a surface by carving or etching
engraver
a printmaker who prints from an engraved printing plate
engraver
One who engraves; a person whose business it is to produce engraved work, especially on metal or wood
engraver
the person who actually cuts the design of a coin into the die
engraver
An engraver is someone who cuts designs or words on metal, glass, or wood
engraver
a skilled worker who can inscribe designs or writing onto a surface by carving or etching
engraver
the artist who sculpts the coin design prior to making dies The master dies are made from the large sized sculpted artwork
engraver
{i} one who engraves, one who carves letters or designs; tool used in engraving
engraver
an artist who sculpts a model of a coin design
engraver
Motorized etching tool used to engrave names on bowling ball
engraves
third-person singular of engrave
engraving
An intaglio process in which lines are cut into a metal plate and then filled with ink to transfer the image onto paper
engraving
a block or plate that has been engraved
engraving
The art of incising a design on metal In printing, the design is etched onto a metal plate which is then inked and imprinted onto paper The nature of metal allowed for greater detail to be included with engraving plates than could be achieved with wooden blocks
engraving
a print made from an engraving
engraving
The act or art of producing upon hard material incised or raised patterns, characters, lines, and the like; especially, the art of producing such lines, etc
engraving
The general term for incising lines directly into a metal plate or, in the case of wood engraving, an end grain block of hard wood, in intaglio, engraving differs from etching in that the plate is not grounded, and it is the pressure of the tool, not the use of an acid bath, that creates the lines in the metal top
engraving
> The method used to inscribe metal surfaces or to add decorations  A 'graver' cuts thin furrows into the surface after a certain pattern, thereby removing a small amount of metal (unlike chasing)
engraving
A form of printing whereby an image is created by scoring a stamping plate with a carving tool The inked plate transfers the image in reverse onto the paper or fabric
engraving
{i} art of carving out letters or designs on hard surfaces
engraving
an engraved image
engraving
Method for printing in which a design is cut or etched into a metal plate; these cuts are then filled with ink and transferred directly to paper
engraving
Engraving is used for the decoration of the surface itself; also, for producing an original, from which a pattern or design may be printed on paper
engraving
An engraving is a picture that has been printed from a plate on which designs have been cut. a color engraving of oranges and lemons. Any of various processes of cutting a design into a plate or block of metal or wood. The cutting is done by a graver, or burin, on a copper, zinc, aluminum, or magnesium plate, and the design is printed with a roller press from ink rubbed into the incised grooves. Wood engraving derives from the woodcut, but the use of the hard, smooth boxwood, cut with the burin commonly used by the copper-plate engraver, produces a finer, more detailed image. By contrast with engraving from metal plates, the printing of wood engravings is done from the surface of the plate or block; the parts that are not to be printed are cut away. See also etching
engraving
This is probably the oldest of the intaglio processes The design is cut into a hard surface usually metal, with a sharp tool called a burin which carves a line of varying with and depth This line when inked and printed is clear and sharp This prosess is also used in the designs of bank notes, postage stamps, etc
engraving
n 1 An artistic process by which a plate is carved with a sharp tool and filled with ink to transfer the ink to the paper 2 Artwork made from such a process
engraving
An intaglio technique in which a metal plate is manually incised with a burin, an engraving tool with a V-shaped metal shaft Depending on the angle and degree of pressure with which they were scooped out of the metal (usually copper) plate, the incised lines may vary in width and darkness when printed The result is a very steady and considered line, with crisp edges where the burin has cut through the metal
engraving
An impression from an engraved plate, block of wood, or other material; a print
engraving
making engraved or etched plates and printing designs from them
engraving
This is probably the oldest of the intaglio processes The design is cut into a hard surface, usually metal, with a sharp tool called a burin which carves a line out of the metal very cleanly, giving a clear and sharp final line This process is used in the design of bank notes, postage stamps, etc
engraving
in the surface of metal plates or blocks of wood
engraving
An Intaglio technique similar to drypoint When engraving, the artist cuts his design directly into the metal plate The depth and thickness of the line can be altered by hand pressure As in the other intaglio methods, ink gathers in the recessed areas Dampened paper is then pressed against the plate to absorb the ink and produce an image in reverse
engraving
(1) The art of producing a depressed design on a wood or metal block by cutting it in with a tool (2) The impression or image made from such a wood or metal block by ink that fills the design Compare burin, etching, woodcut
engraving
a print made by cutting a design into a metal plate with a pointed steel tool known as a burin The plate is inked, and the ink wiped off, except for that remaining in the groove Then the plate, covered with a damp sheet of paper, is run through a heavy press to reproduce an image the reverse of that on the plate
engraving
- the lines of a drawing are cut into a metal plate (always copper in the seventeenth century) with a sharp v-shaped metal instrument called a graver or burin The completed plate would then be covered with ink and the surface wiped, the incised lines retaining ink The inked design would then be transferred to a sheet of wet paper as both plate and paper were run through a roller press under pressure The plate would then be re-inked for each impression
engraving
a technique of cutting into the surface of glass with a metal or stone wheel to create lines or forms, such as portraits
engraving
Printing technique in which an intaglio image is produced by cutting a metal plate or box directly with a sharp engraving tool The incised lines are linked and printed with the heavy pressure
engraving
Glass can be engraved with numerous patterns Our glass is engraved freehand -- a task which requires precision, an eye for proportion, and a steady hand The design is produced step by step The proper bit must be chosen for each detail in the design This means that a complicated design requires the use of several different bits Because the design usually consists of flowers, leaves, bows, and so forth, the process is sometimes called "blomslipning" or "floral engraving" in Swedish
engraving
A printing process whereby images such as copy or art are etched onto a plate When ink is applied, these etched areas act as small wells to hold the ink; paper is forced against this die and the ink is lifted out of the etched areas creating raised images on the paper
engraving
An engraving is a picture or design that has been cut into a surface
engraving
Precise grooves are cut into the plate with a sharp tool called a burin; widely used for early reproductive printmaking
engraving
process of cutting into the surface of the metal for decorative effect This method is widely used for inscriptions, coats of arms and ornament A variety of effects are achieved by using different cutting tools
engraving
A printing process whereby lines are incised on a highly polished metal plate by means of a sharp-pointed instrument, diamond-shaped in cross section, called a burin or graver The tool works like a plough cutting a furrow The strength of the line may be increased by cutting deeper The burin is held in a fixed position and, to produce a curved line, the plate itself is turned This makes engraving a slow and painstaking technique producing controlled, formal results
engraving
making engraved or etched plates and printing designs from them a block or plate that has been engraved a print made from an engraving
engraving
designs achieved by cutting the surface of metal by the use of sharp tools, called gravers, which remove small amounts of metal
engraving
Printing method using a metal plate (die) with an image carved into it
engraving
(English) The cutting of a design into a metal surface Engraved metal plates were used in printing, and the resulting print on paper is also called an engraving
engraving
That which is engraved; an engraved plate
engraving
Printing method using a plate, also called a die, with an image cut into its surface
engrave
المفضلات